Last Updated on by Jeremy
Disclaimers: Living the Dream uses demographic data, email opt-ins, display advertising, and affiliate links to operate this site. Please review our Terms and Conditions for more information. Listed prices and attraction details may have changed since our visit and initial publication.
In the many years of running our blog's newsletter, we never had an issue. We'd send out our weekly RSS email via MailChimp, get a nominal amount of clicks, and move on.
But as time ticked by and our subscriber count went up, so did our fees. Our local Pittsburgh blog contributed the most of this gain, and we realized we were days away from hitting the 10,000 subscriber limit that bumped our fees to $100/month- holy crap!
As our spending for the newsletters amounted to about $0.10 to $0.30 per click, we knew there had to be a better way. Do we delete inactive subscribers? Do we try and get better engagement? Do we switch services?
Enter MailerLite– the answer to all our questions. And in this MailerLite review I'm going to share how we became converts from MailChimp on Day 1.
What is Special About MailerLite? Nothing… and That's a Good Thing!
We had MailerLite recommended to us by several blogging colleagues who were aware of our pending issue, and a solid percentage all told us the same thing: MailerLite is a deal.
It piqued our curiosity and we quickly ran to the pricing page to find out that with the same 10,000+ subscribers we would be paying just $50/month.
Going even further, if we decided to pre-pay a year in advance they offer a 30% discount- meaning that paying yearly ($420) we would cut our total fees down by $780.
I signed up without even looking at what the service involved.
Using our newsletter as a glorified RSS feed was expensive in its own right (read our newsletter tips article for more about this), but saving 65% on our current bill would get our cost per click average to be in line with what we receive on Facebook (read: pennies).
We didn't care if there was a reduction of quality, we were in. Currently we're on the monthly subscription and plan to make the leap to annual for that 30% price break here soon enough.
A Surprising Find – Mailer Lite is Almost Identical to Mailchimp!
It didn't take long for us to get a sense of familiarity with MailerLite. Within seconds of logging in to the dashboard we felt like we had been here before, and it was because MailerLite is so similar to Mailchimp that it is almost a clone!
We can't say whether or not this is by design, and I'm certain that neither service would like us saying this, but it is how we see it.
If you are familiar with Mailchimp at all, working your way through MailerLite will be second nature to you. As we worked through the migration and startup tasks, a pattern emerged:
- Importing lists: was the same we were used to.
- Generating embed subscribe boxes: it was the same.
- Setting up a campaign: same.
- Customizing the newsletter content (all the way to the image editor): same.
- Scheduling recurring sends: same.
- …we could go on.
So while it took us a few hours to set up both of our lists and get everything going properly, this was a drastic reduction in time over what it could've been. We already knew what we were doing from the get-go.
A few things did strike us as different on MailerLite during our account set-up, insofar as we are aware at least, and they were as follows.
First, MailerLite has a thing called “subscriber groups” that must be published before building an embed box or uploading existing subscribers. These are subsets of your general list that can be tied to a specific subscribe box.
So say you want a subscribe box purely for your sidebar, you'd first create a group called “[X] Sidebar” and then when creating the form you'd click a box to reference this group.
It is only slightly time consuming to set up if you want one for every instance of your subscribe box (we have five on each site), but is a great way to help monitor where your subscribers are coming from.
We never knew we were getting so many from Facebook!
This is different from the “subscriber segments” feature which lets you distribute your list into different channels based on activity data.
When sending a campaign you can send a newsletter out to the groups individually, or your entire list (we do the latter, naturally).
Second, MailerLite lets you organize your subscribers based on a number of parameters including # of emails sent, # opened, # clicked, and subscribe date.
We foresee this one being extremely useful a year or so down the road when we get to a new fee level and can go through and purge people who've been on our lists for a year and never opened a single email. No need sending out a confirmation email when the stats tell the truth outright!
A lot of the above data is also available on the individual campaign level, which we also appreciate even if we'll likely never use it based on our current setup.
Finally, there is a safety feature for weekly RSS shares in that you can limit the total of number posts pulled as well as limiting to only new posts.
So if we set it at three posts, our most recent three posts will go out every week. But if we limit it to only new posts, up to three posts since joining MailerLite or the last RSS send will go out.
This one is key to understand because we started our campaign after publishing our newest posts for the week, so when it came time for our first campaign to go out we got an email that no newsletter was sent because we had no new posts.
We had to go in, override the setting to send the three most recent posts, and off it went. After it went out we went back in to our dashboard and enabled the feature to limit to only new posts, published new content for the week, and off we went as designed.
Just a nuance to keep in mind when you change your newsletters around in the future!
A Few Things to Consider Before Joining Mailer Lite
One thing that took us by surprise with MailerLite is the approval process required for setup for those with > 1,000 subscribers. As we had started our lists fresh on Mailchimp, we had never experienced it before.
MailerLite will let you purchase a subscription for your list right away, but when you go to send your first campaign you'll likely hit a manual approval roadblock.
Once you submit at this step MailerLite will review your account to ensure you are not a spammer (always a good thing) and will generally approve accounts within a day.
This is important to keep in mind for two reasons:
- MailerLite may ask you for screen shots of your last campaign to see bounce rate, unsubscribe rate, open rate, etc to ensure you're not spam- so don't delete your old account just yet.
- If you have a scheduled send that readers may be waiting on, this could cause a delay if you don't plan for it in advance.
We actually fell into the first category with our Pittsburgh blog because our list was so large that we had to provide proof. We had a bit of a mix-up with the customer service rep we spoke to (who I think went home right as we were sending our screenshots), but we re-sent to the fresh customer service line the following morning and were approved within 15 minutes.
Easiest transition I've done in a long time.
Likewise, if you are migrating from an existing service, like we did from Mailchimp, its worth keeping in mind that your list migration is manual. MailerLite has no way of tracking how your account performs from its previous host.
This is important to note because if you take a period of days or weeks to set up your account before going live you may get more subscriptions (and unsubscriptions!) on your existing service. If you've uploaded your list early on, you may miss out on these changes.
I'd hate to miss out on a subscriber during the migration, but I'd hate to piss off someone who unsubscribes and is kept on even more.
So watch your list performance closely or, in an absolute worst case, wait until the last minute to upload your existing list to minimize these kind of issues. In any case, watch your list updates in the first few weeks after migrating as someone may still go in and unsubscribe from an old newsletter!
A few times we've seen them take on the order of 0.5 to 1.0 seconds to load and thus slightly delay our site's load time. For most this wouldn't be noticeable at all, but as I am in the midst of optimizing my site time as best as possible this was something that stuck out at me right away.
Still not anywhere close to a deal breaker.
Overall, MailerLite is one of those services that we fell in love with immediately and wondered why we took so long to join in the first place.
In this particular instance it was because we didn't even know it existed, but you now have no excuse- join MailerLite and save a lot of money on your newsletter service today!
Have an existing blog that is in need of an upgrade? Check out the following services we personally use!
- BigScoots - Premium managed hosting with plans as low as $35/month.
- GeneratePress - A customizable theme designed for site speed.
- AdInserter - A widget logic plugin that is quite powerful.
- WP Rocket - An image and caching optimization plug-in.
- Tailwind - Pinterest scheduling tool.
- Mailerlite - Cost effective newsletter service.
- Super Star Blogging - Travel blogging courses- now just $99 each!
- Keysearch - Keyword research tool for SEO.
Looking for tips? Read our Blog Your Trip series!